Difference between revisions of "OPP"
(Created page with "= Open Pinball Project = The [https://openpinballproject.wordpress.com/ Open Pinball Project (OPP)] was started in 2012 as a resource for pinball makers to have an inexpensiv...") |
(No difference)
|
Revision as of 18:23, 17 August 2016
Open Pinball Project
The Open Pinball Project (OPP) was started in 2012 as a resource for pinball makers to have an inexpensive, fully open sourced project for controlling custom pinball machines. It is currently on a second generation design and has had a successful Kickstarter run of boards and components currently in the hands of makers all over the world.
Hardware
The OPP hardware is made up of three main components:
- The Processor board is a Cypress Semiconductor CY8CKIT-049-42XX PSoC prototyping board that can be purchased from Mouser or Digikey
- The Interface board allows communications between Processor boards via a custom serial communications protocol
- The Wing boards allow the control of solenoids, lamps, LEDs or input from switches