Jump to: navigation, search

OPP

Revision as of 18:23, 17 August 2016 by Jwilson (talk | contribs) (Created page with "= Open Pinball Project = The [https://openpinballproject.wordpress.com/ Open Pinball Project (OPP)] was started in 2012 as a resource for pinball makers to have an inexpensiv...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Open Pinball Project

The Open Pinball Project (OPP) was started in 2012 as a resource for pinball makers to have an inexpensive, fully open sourced project for controlling custom pinball machines. It is currently on a second generation design and has had a successful Kickstarter run of boards and components currently in the hands of makers all over the world.

Hardware

The OPP hardware is made up of three main components:

  • The Processor board is a Cypress Semiconductor CY8CKIT-049-42XX PSoC prototyping board that can be purchased from Mouser or Digikey
  • The Interface board allows communications between Processor boards via a custom serial communications protocol
  • The Wing boards allow the control of solenoids, lamps, LEDs or input from switches

Processor Boards